Aiphone JF-2MED Manuel d'utilisateur télécharger pdf (Page 12)

- 12 -

EnglishFrançaisNederlands

If TALK button is pressed at the transferred station, communication

with door station is performed (the transferring station's screen goes off).

Press TALK button to end communication.

If TALK button is pressed at the transferred station, the unit enters

room-to-room communication. The sender informs the receiver that

communication will be transferred, and TALK button is pressed and

released at either the transferring station or transferred station to end

the room-to-room communication. (The screen continues to display

the image of door station.)

During communication with door station, press CALL button to call

the transferring station.

• CALL button (red) flashes and the communication with door station

is put on hold.

• The "All Call" function is activated to link all the master/sub stations.

NOTES: 1. If TALK button is pressed at the transferring station before starting

communication between the transferred station and door station, the

unit enters the condition where the forwarding source communicates

with door station. After ending the room-to-room communication in

step 2, TALK button must not be pressed at the transferring station for

a while (until the transferred station enters communication with door

station).

2. Communication (video) with door station ends automatically approx.

1 minute after first starting the communication.

Press TALK button within 30 seconds to start it again.

If a call is received from video door station, the unit starts recording automatically. The record LED (red)

flashes during recording.

• The recording starts approx. 2 seconds after CALL button of video door station is pressed. A maximum

length of approx. 8 seconds (8 shots) can be recorded with 1 picture and 1 shot for each second.

• A maximum of 50 pictures can be recorded (combined total of automatic recording and manual

recording pictures). If 50 pictures are exceeded, pictures are overwritten starting from the picture with

the oldest recording date.

NOTES: 1. The automatic recording function cannot be cancelled.

2. The screen shown when monitoring the entrance is not recorded automatically.

If you wish to record this screen, press REC button.

• A maximum length of approx. 8 seconds (8 shots) can be recorded

with 1 picture and 1 shot for each second.

• A maximum of 50 pictures can be recorded (combined total of

automatic recording and manual recording pictures). If 50 pictures are

exceeded, pictures are overwritten starting from the picture with the

oldest recording date.

Press REC button. The record LED (red) flashes and recording starts.Display a video image with an operation such as entrance monitoring.

NOTES: 1. Manual recording is not possible during automatic recording (approx.

9 seconds after receiving a call from door station).

2. After the end of automatic recording (approx. 9 seconds have passed

after receiving a call from the door station), another picture different

from the automatically recorded picture is recorded.

Transfer entrance call8-6

Automatic recording8-7

Manual recording8-8

1 2 ... 7 8 9 10 11 12 13 14 15 16

Commentaires sur ces manuels

Pas de commentaire

Aiphone JF-2MED Manuel d'utilisateur Page 12

Commentaires sur ces manuels